Asia-Ton Machineries Sdn Bhd » Hydraulic Breakers

MSB Heavy Duty Grapple Stone Grab

admin — Thu, 25 Mar 2010 09:35:05 +0000

MSB Stone Grab is designed to be stronger than any other machinery, and be used for any difficult job site like demolition, recycling and construction.

Unlimited clockwise and anti-clockwise rotation.
Main frames are made by Hardox for long life time.
Hydraulic motor is mounted outside of slew ring for easy maintenance.
Operator control rotation speed.
There are two rows of ball bearings on the slw ring for better stability.
Hydraulic check points are easy to connect as they are located in one area.
Five models available for carrier vehicle from 3.5 to 42 tons.

MSB Stone Grab Technical Table

DESCRIPTION		UNIT	MSSG 1000H	MSSG 1000H	MSSG 1000H	MSSG 1000H	MSSG 1000H
Operating Weight		Kg	460	900	1370	2100	2500
Capacity		l	140	300	500	800	900
Dimension	A	mm	934	1053	1210	1502	1502
	B	mm	1650	1718	2000	2038	2038
	C	mm	1105	1204	1444	1873	1873
	D	mm	911	1034	1270	1723	1723
	E	mm	515	850	1000	1115	1370
Closing Force on Edges		kN	15	40	50	60	60
Hydraulic of the Cylinder	P(max)	bar	300	350	350	350	350
Hydraulic of the Cylinder	Q(max)	1/min	40	80	100	85	85
Hydraulic of the Rotation	P(optimal)	bar	140	140	140	170	170
	Q(optimal)	1/min	18	40	40	40	40
	Speed	rpm	20	20	20	20	20
Carrier Weight		ton	3.5~6.5	6.5~18	18~25	28~35	36~42

MSB Rotation CRUSHER Rotation SHEAR

admin — Thu, 25 Mar 2010 09:30:08 +0000

MSB Crusher & Shear series offer perfect performance for demolition and recycling.A high performance cylinder and basic installation of speed up value reduces operating time and increase productivity in job site.

Unlimited clockwise and anti-clockwise rotation.
Jaws are made by Hardox for long life time.
Hydraulic cylinders are well protected against damage.
Operator control rotation speed.
Rapid jaw opening closing.
Cutting blades can be changed by four times to increase life time.
Massive cutting force.
Interchangeable jaws give three application for the price of one.


MSB Rotation CRUSHER	MSB Rotation Rotation Shear

MSB Rotation CRUSHER Technical Table

DESCRIPTION		UNIT	MSRC
DESCRIPTION		UNIT	300H	700H	1500MH	1500H	2000H	3000H
Operating Weight		Kg	160	580	1350	1400	1900	2600
Dimension	A	mm	612	880	1126	1126	1290	1564
	B	mm	609	959	1226	1226	1343	1629
	C	mm	1014	1355	1870	1870	2161	2435
	D	mm	990	1350	1833	1833	2098	2350
	E	mm	190	316	426	426	450	490
	F	mm	280	450	560	510	615	740
	G	mm	280	450	510	510	570	730
	K	mm	438	480	799	799	940	1100
	L	mm	115	139	210	210	360	469
Hydraulic of the Cylinder	P(max)	bar	250	280	320	320	320	320
Hydraulic of the Cylinder	Q(max)	1/min	10~20	45~100	100~180	100~180	100~250	200~350
Hydraulic of the Rotation	P(optimal)	bar	-	140	-	170	170	170
Hydraulic of the Rotation	Q(optimal)	1/min	-	20~45	-	20~56	20~56	20~56
Closing Force	H	ton	9	20	41	41	59	98
	I	ton	13	30	64	64	100	137
	J	ton	31	64	157	157	210	302
Carrier Weight		ton	1~3	5~10	13~18	13~18	18~25	28~38

MSB Rotation Rotation Shear Technical Table

DESCRIPTION		UNIT	MSRS 3000H
Operating Weight		Kg	2500
Dimension	A	mm	2334
	B	mm	1280
	C	mm	586
	D	mm	600
Hydraulic of the Cylinder	P(max)	bar	320
Hydraulic of the Cylinder	Q(max)	1/min	200~350
Hydraulic of the Rotation	P(optimal)	bar	170
Hydraulic of the Rotation	Q(optimal)	1/min	20~56
Closing Force	E	ton	332
	F	ton	154
	G	ton	92
Cutter Size ( max )	: H-Beam	mm	200 x 200 x 8 x 12
Carrier Weight		ton	26~32

MSB New PULVERIZER with Changeable Tooth

admin — Thu, 25 Mar 2010 09:28:19 +0000

New MSB Hydraulic Pulverizer series offer elevated performance for demolition and recycling with new and high performance cylinder. Specially MSHP CT series offer exchangeable tooth assembly which made out of Hardox for economical maintenance and long life time with high durability in every job site.

MSB Hydraulic Pulverizer series Technical Table

DESCRIPTION		UNIT	MSHP 2000H	MSHP 2000CT	MSHP 3000H
Weight		Kg	1750	1950	2500
Dimension	A	mm	1936	938	2065
	B	mm	1466	1462	1620
	C	mm	955	955	1040
	D	mm	539	607	610
	E	mm	2290	2292	2455
	F	mm	255	255	280
Hydraulic of the Cylinder		bar	320	320	320
Crushing	G	ton	50	50	70
	H	ton	63	63	93
	I	ton	110	110	160
Cutting Force	J	ton	185	185	260
Blade Length		mm	175	175	175
Carrier Weight		ton	18~28	18~28	28~40

MS-MEDIUM LARGE BREAKERS – Hydraulic Type

admin — Thu, 25 Mar 2010 09:22:34 +0000

MS – New Hydraupia Medium & Large breakers are the best for

Available from 14tons to 85tons large size excavators.
High impact energy.
Fully enclosed housing to protect the breaker mechanism
Patented sealing and piston guidance system.
Automatic greasing system and underwater system are fully and internally equipped.
Advanced noise reducing system in new housing.
Patented vibration buffer system to protect the carrier vehicle.
Tool bushing liners to save costs of replacing tool bushings.
Breaking hard rock, reinforced concrete, metallurgical slag.
High impact energy which is the same with every blow.

MS-MEDIUM & LARGE BREAKERS Series Internal Structure



MS 500H	MS 550H	MS 600H	MS 700H	MS 800H	MS 900H	MS 1000H

Technical Specification

ITEM	UNIT	SPECIFICATION
ITEM	UNIT	MS 500H	MS 550H	MS 600H	MS 700H	MS 800H	MS 900H	MS 1000H
Working Weight	Kg	1070	1465	1680	2055	2720	3545	5700
Impact Energy	J	2850	4375	5780	7500	10000	12000	14420
Impact Rate	bpm	400~700	360~650	350~550	350~550	340~550	320~510	300~450
Operating Pressure	bar	120~140	120~140	120~140	130~150	130~150	130~150	130~150
Relief Pressure	bar	170~190	170~190	170~190	180~200	180~200	180~200	180~200
Oil Flow Range	1/min	80~100	110~150	130~150	170~200	190~220	210~240	230~305
Tool Diameter	mm	110	120	130	140	160	170	180
Pressure Line Size	mm	19	25	25	25	25	25	32
Return Line Size	mm	25	25	25	32	32	32	32
Optimum Oil Temperature	‘C	+40~+60	+40~+60	+40~+60	+40~+60	+40~+60	+40~+60	+40~+60
Optimum Oil Viscosity	cSt	30~60	30~60	30~60	30~60	30~60	30~60	30~60
Carrier Weight	ton	14~18	18~26	22~28	25~32	33~45	40~60	50~85

MS-SMALL BREAKERS – Hydraulic Type

admin — Thu, 25 Mar 2010 09:14:53 +0000

MS-Small breakers are suitable for mounting on tractor back-hoes, mini-excavators and skid steer loaders. They are mainly used for breaking concrete, asphalt, hard or frozen ground and for scaling in mines and tunnels.
They have a high production rate for thier size range and provide a good return on investment to customer.

MS- Small Breakers are the best for

Mini-excavators, skid-steer loaders, tractor back-hoes and small excavator.
High breaking capacity
Breaking asphalt, concrete, hard and frozen ground.
Low operation cost
High return on investment.
Easy service and maintenance.

MS-Small Series Internal Structure


MS 200HS	MS 250HS	MS 225H ( Backhoe Type )	MS 300HS	MS 400HS	MS 450HS

Technical Specification ( OPEN TYPE )

ITEM	UNIT	SPECIFICATION
ITEM	UNIT	MS 200H	MS 250H	MS 225H	MS 300H	MS 400H	MS 450H
Working Weight	Kg	285	420	355	475	610	780
Impact Energy	J	470	900	900	1060	1570	2265
Impact Rate	bpm	500~950	520~1000	520~1000	500~900	350~700	350~700
Operating Pressure	bar	110~130	110~130	110~130	110~130	120~140	120~140
Relief Pressure	bar	160~180	160~180	160~180	160~180	160~180	160~180
Oil Flow Range	1/min	40~50	60~80	60~80	60~80	70~90	70~90
Tool Diameter	mm	63	75	75	85	95	100
Pressure Line Size	mm	12	19	19	19	19	19
Return Line Size	mm	12	19	19	19	19	19
Optimum Oil Temperature	‘C	+40~+60	+40~+60	+40~+60	+40~+60	+40~+60	+40~+60
Optimum Oil Viscosity	cSt	30~60	30~60	30~60	30~60	30~60	30~60
Carrier Weight	ton	2~6	3~8	3~8	4~10	6~13	10~16

( BOX TYPE )

SPECIFICATION
MS 200HS	MS 250HS	MS 300HS	MS 400HS	MS 450HS
325	410	465	475	860
470	900	1060	1570	2265
500~950	520~1000	500~900	350~700	350~700
110~130	110~130	110~130	120~140	120~140
160~180	160~180	160~180	160~180	160~180
40~50	60~80	60~80	70~90	70~90
63	75	85	95	100
12	19	19	19	19
12	19	19	19	19
+40~+60	+40~+60	+40~+60	+40~+60	+40~+60
30~60	30~60	30~60	30~60	30~60
2~6	3~8	3~8	4~10	6~13

SAGA BREAKERS Gas- Hydraulic Type

admin — Wed, 24 Mar 2010 16:26:40 +0000

Saga Breakers are suitable for mounting from mini-excavators and skid-steer loaders to 40tons large excavators. It adds versatility to small carrier and large excavator. Saga Breakers will give you an opportunity of additional income, especially for the rental and plant company, and good return on investment.

Saga Breakers are the best for

Available from 0.8tons mini-excavators to 40tons large size excavators.
High impact energy and impact rate.
High efficiency with optimized control valve.
Low operation cost.
High return on investment.
Easy service and maintenance.

Saga Series Internal Structure


SAGA 30H	SAGA 40H	SAGA 55H	SAGA 120H	SAGA 200H	SAGA 200HS ( BOX TYPE )	SAGA 300H

Technical Specification

ITEM	UNIT	SPECIFICATION
ITEM	UNIT	SAGA 20H	SAGA 30H	SAGA 40H	SAGA 50H	SAGA 55H	SAGA 100H	SAGA 120H	SAHA 120HS
Working Weight	Kg	100	155	175	280	325	600	810	965
Impact Energy	J	286	320	420	680	680	1500	2100	2100
Impact Rate	bpm	700~1000	600~950	550~800	500~750	500~750	400~800	450~650	450~650
Operating Pressure	bar	80~110	90~120	90~120	95~130	95~130	130~150	140~160	140~160
Relief Pressure	bar	140~160	140~160	140~160	150~170	150~170	180~190	180~200	180~200
Oil Flow Range	1/min	15~30	25~40	30~45	35~50	35~50	45~90	80~100	80~100
Tool Diameter	mm	44.5	53	59.5	68	68	85	98	98
Pressure Line Size	mm	12	12	12	12	12	19	19	19
Return Line Size	mm	12	12	12	12	12	19	19	19
Optimum Oil Temperature	‘C	+40~+60	+40~+60	+40~+60	+40~+60	+40~+60	+40~+60	+40~+60	+40~+60
Optimum Oil Viscosity	cSt	30~60	30~60	30~60	30~60	30~60	30~60	30~60	30~60
Carrier Weight	ton	0.8~3	1.2~3.5	3~6	3.5~9	3.5~9	6~12	9~13	9~13

ITEM	UNIT	SPECIFICATION
ITEM	UNIT	SAHA 120HS	SAGA 180H	SAGA 200H	SAGA 200HS	SAGA 300H	SAGA 350H
Working Weight	Kg	965	1325	1620	1400	2305	3005
Impact Energy	J	2100	3200	4500	4500	7000	9500
Impact Rate	bpm	450~650	450~800	400~800	400~800	350~700	300~600
Operating Pressure	bar	140~160	150~170	160~180	160~180	160~180	160~190
Relief Pressure	bar	180~200	190~210	210~220	210~220	210~220	220~230
Oil Flow Range	1/min	80~100	90~120	125~150	125~150	160~190	180~220
Tool Diameter	mm	98	120	135	135	150	153
Pressure Line Size	mm	19	25	25	25	25	25
Return Line Size	mm	19	25	25	25	25	25
Optimum Oil Temperature	‘C	+40~+60	+40~+60	+40~+60	+40~+60	+40~+60	+40~+60
Optimum Oil Viscosity	cSt	30~60	30~60	30~60	30~60	30~60	30~60
Carrier Weight	ton	9~13	13~18	18~25	18~25	25~30	28~40